Raspberry pi 3/5 vertical fan case

A vertical case for a raspberry pi 3/3b/5 with a 5020 fan, a USB-C plug and an optional spot for a speaker WARNING: the ports on the side of your pi won't be acessible after assembly What you'll need:Raspberry piUSB-C PD board5/12V 5020 fanSmall speaker under 4mm of thickness (thicker speakers are possible if the magnet fits in the USB board hole)Soldering ironPainter's tape (Optional, for making the cover fit more snugly)3W mono amplifier (optional)Raspberry pi active/passive cooler (Optional, but recommended)At least 4 fan screwsWiring:Amplifier: (OPTIONAL)V1 and V2 to the speaker's + and - GND to any GroundVCC to PP7 on pi3 / USB 5V line on pi5Left/right channels: pp25 and pp26 on pi3 / left and right audio channels on pi5FAN:red wire (+) to pp7 on pi3 / USB 5V line on pi5black wire (-) to and Ground(OPTIONAL) yellow wire (PWM) to any GPIO pin that supports PWM(OPTIONAL) blue wire (TACH) to any GPIO pin that supports inputUSB-C board:+ to the GPIO +5V pin- to any Gro