Thingiverse
Raspberry Pi 3 B+ Wall Mount
15
Downloads
7
Likes
0
Makes
Remixed from hmgGerd's quick-connect wall mounted case for the Pi 4. I love the design, the functionality, and I've used it several times for my Pi 4 projects. However, I have multiple Pi 3B+ s still in use that I also wanted to wall mount, so I took matters into my own hands.
The base plate that actually screws to the wall is the exact same as from the original project, so both cases should be interchangeable with it.
Assembled with M4 1/4 inch screws to mount the board, and M4 3/4 inch screws to secure the case.
In the (orange) picture, the port openings on the side for the mini-usb, 3.5mm aux jack, and HDMI port are just a little bit off. This was the V1. It has since been updated, and the ports line up much better with the V2 files (green picture).
The base plate that actually screws to the wall is the exact same as from the original project, so both cases should be interchangeable with it.
Assembled with M4 1/4 inch screws to mount the board, and M4 3/4 inch screws to secure the case.
In the (orange) picture, the port openings on the side for the mini-usb, 3.5mm aux jack, and HDMI port are just a little bit off. This was the V1. It has since been updated, and the ports line up much better with the V2 files (green picture).
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
