Raspberry Pi 5 Active Cooler Case

EDIT 1/20/2024 - I made a very similar case to this with a below-the-Pi NVME board (or other PCI accessory) - www.thingiverse.com/thing:6431038


This is a case for the Raspberry Pi 5 and the official Active Cooler.

I do not have the hardware on hand at the time of publishing this Thing.

I made this from an STP of the board that I found on raspberrypi.com . Plus an Active Cooler model I made from dimensional drawings.

It has been test fitted by a friend who has the hardware.

It is intended to have the TOP, BOTTOM, GPIO and HDMI sides laser cut from 3mm acrylic or whatever - but you can also print those parts if you don't have a laser cutter.

It is intended to be assembled with m3 screws, 8mm long. Or #4 self tapping screws of a similar length.

I included an STP file for remixing or modifying for different fasteners.

This is still experimental. I may update later once I have the physical hardware on hand.