Raspberry Pi 5 Case

The case designed for Raspberry Pi 5 can be easily used by printing even in 3D. The top and bottom parts of the case are designed to be interlocked. Raspberry Pi is designed to be used with its own active cooling fan. Place Raspberry Pi in the bottom case and when everything is ready, carefully close the top cover and press. The parts where the camera and GPIO pins are located on the upper cover are closed. When you want to use these parts, you can use them by breaking the parts there. For printing settings; - Layer Height: 0.12 mm - First Layer Height: 0.12 mm - Fill Density: 40% - Fill Pattern: Gyroid - Create Support: Tree (Use only for the Bottom Case)