Raspberry Pi 5 Case with VESA Mount & Power Button

Original Case from @squirrelbrain.I have created and added a VESA mount with 2 size depending of your monitor and mount. The mount is design to allow the Pi to be easily removed for maintenance. At work we use Pi5 as thin clients, these mounts make it clean on the desk. Especially since it allows you to use much shorter HDMI cables to plug in 2 monitors. Additional Changes from the original:Added missing holes on the front brimAdded a power button to the case to push on the Pi&#39;s button.Removed the small pocket on the Pi Mounting and Top parts that were causing weird artifact in the print.Slightly increased the holes on the Pi Mounting to fit M2.6 screwsYou will need:CaseM2.5x10 self tapping screws X13M2.5x8 self tapping screws X4M3x12 X4M3 Nuts or M3 inset X4 (Depending on your fan)MountingM5x10 BHCS X4M5(OD 7mm)x5mm insets X4No supports are needed for this design. Parts list and links:M5(OD 7mm)x5mm insetsM5x10 BHCS X4M3 NutsM3x12<a target="_blank" rel="noopener noreferrer ugc" hr