Raspberry Pi 5 NVMe NAS

Finaly Raspberry version with proper NVMe disks support:)
So i have decided to build simple NAS with two mirrored NVMe disks and openmediavault software.
Disks are installed in Pimoroni NVMe Base Duo for Raspberry Pi 5.
I have bought extra flexible cable between Rpi and Duo Base as included one was too short.
So i have used Pimoroni PCIe Flex cable for NVMe Base and Raspberry Pi 5, 50 mm.

It is very nice small and low energy consumption NAS server!

System is installed on UUGear Raspikey, 16GB eMMC drive instead of SD card. It is faster and should last longer than SD card. I dont like SD cards:)

Also official Rpi5 heatsink with little fan was used.
With this setup there was idle temperatures of CPU around 50C and disks was about 45C.
With heavy usage it was 55/68/70C so i have decided to add one fan more. 80mm fan on top of the case. It is not so noisy but a will probably add 50-100 Ohm resistor in series with fan to slow it down and make it even less noiser. Similar as N