Raspberry Pi 7" Touchscreen Super Awesome Portable

UPDATE: The original model was optimized to slice and print well on my printer, which has a 0.35 nozzle. But a friend had trouble slicing this for his 0.4 printer due to the very thin walls of the enclosure. So I have uploaded alternate versions of the case and surround .stl files that have a 2mm wall thickness. (The original is 1.85mm) The same brackets can be used with either design. After slicing, it is recommended that you inspect the tool path output in the gcode before you print, to ensure adequate wall strength.

The Raspberry Pi makes a great portable linux machine, but it is hard to manage without some kind of display. Now the 7" touchscreen makes it easy to see what the Pi is doing. There were a few good case designs already, but none of them allowed easy access to change the SD card. I also had problems slicing some of the existing designs to fit onto my 200mm printer.

This project was inspired by http://www.thingiverse.com/thing:1082431 and http://www.thingive