Raspberry Pi Cam V2 Astrocam Assembly Case

I needed a case to protect my pi cam when mounted on my telescope. I modified the Pi cam just a little. I purchased a Svbony 1.25" to C12 CCD camera to eyepiece adapter, this also has a thread for standard telescope filters a UV/IR filter recommended. I also purchased an S mount M12 Board lens holder made of ABS (there are die-cast metal ones I do not recommend as they can short things on the circuit board)
The Lens holder mount was modified by filing a grove to accommodate the camera module plug on the circuit board. the mounting holes on the circuit board on either side of the camera module were filed inward toward the camera to help make them line up with the lens holder mount and to center it over the sensor when done. the mount was attached with two 2mm SS screws and a fiber washer on either side. the screws will thread into the mount gently. the Pi cam lens is removed prior to assembling the lens mount to the board once all the work is done and cleaned of dust, only then c