Thingiverse

Raspberry Pi Camera Bracket

von Golbie

59 Downloads

41 Likes

1 Makes

Bracket to mount Raspberry Pi Camera Board V2. Originally designed to use existing left over hardware. One M4 x 20 bolt through the adjusting hole and one M4 T-Nut. Adjust the camera to the position you want and tighten the bolt. I mounted it directly to my raspberry pi 2 case but could be mounted to t-slots in frame if the right length bolt is used (not a left over component). The camera slips over the posts on the swivel bracket and I used hot glue to securely fasten it.

Be sure to check clearances before permanently mounting camera to frame. There is a possibility of interference/crashing.

bracket camera camera mount Creality Ender 3 mounting bracket octopi Octopi camera Raspberry Pi raspberry pi camera bracket camera camera mount Creality Ender 3 mounting bracket octopi Octopi camera Raspberry Pi raspberry pi camera

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Warum?

aufwändige Nachbearbeitung

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 2/3

Drucker