Raspberry Pi Camera-HDMI adapter mounting case

Had a Raspberry Pi Module-3 camera that I wanted to use with my RPi Klipper setup. The camera uses a short FPC cable (yuck). Fortunately, there are adapters out there to convert the hookup to an HDMI adapter, allowing the use of common video cables (https://www.amazon.com/dp/B06XDNBM63?psc=1&ref=ppx_yo2ov_dt_b_product_details)
This project creates a housing for the adapters, which come in pairs.
Box-1 is at the RPi end, and accommodates the ribbon cable, the HDMI cable, and option to plug in an audio jack. The lid is a nice press fit. It has no mounting tab, since there was no good place to mount it on my monitor setup, and I used two sided tape to mount it on top of the RPi USB ports. A mounting tab is easily added, let me know (with details) if you need it done.
Box-2 is at the camera end, and uses the camera supplied spacers to mount everything. Note that there are 2 lids for box 2: One has spacers below the mounting hole for the camera board, but is a pain as far as generating s