Raspberry Pi Camera V2 Snapmaker 2 Toolhead Mount

A mount to attach your [raspberry pi v2 camera](https://www.amazon.com/gp/product/B083BHJZ16/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1) to the toolhead of your [Snapmaker](https://snapmaker.com/product/snapmaker-2).

This allows you to aim the camera directly at the extruder nozzle so you can closely inspect layers as they go down to ensure no problems.

Mounting hardware ([All came in this kit](https://www.amazon.com/gp/product/B015A34BUQ/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1)):
- To replace the toolhead screws
- 4 M2x6
- For the toolhead mount horizontal arm
- 1 M2x10 screw
- 1 M2 nut
- For the horizontal arm sliding mount
- 2 M2x8 screws
- 2 M2 nuts
- 2 M2 washers
- For the sliding arm vertical arm
- 1 M2x14 screws
- For vertical arm pi camera v2
- 4 (or 2 if you're lazy) M2x4 screws
- You might wants nuts too (again, if you're not lazy)



**NOTE**: I messed up a bit on the dimensions, so the vertical arm