Raspberry Pi Case for Waveshare 4.3 inch DSI LCD module

This is a case I designed for Raspberry Pi with [Waveshare 4.3 inch LCD module](https://www.waveshare.com/wiki/4.3inch_DSI_LCD) which makes a nice setup for running OctoPrint, Klipper/etc. You will need some M3 socket head screws and nuts (DIN912) for securing the lid to the case (6x 6mm long) as well as two more for the mounting bracket (M3x8). The swing connection uses M4x16 and one M4 nut. You need two more M4 bolts with t-slot nuts for the 2020 extrusion mount. If you are adding a fan, you need one 50x10mm 5V (I am actually running 12V fan connected to the 5V line - fan runs very quiet and provides sufficient air circulation to keep the RPi cool. You could also use fan controller and have the RPi manage the fan automatically based on temperature.

When assembling the case - insert the screen first, alone, without bolting the Raspberry Pi to it as the case is a sung fit and you won't be able to properly position the ports without risking breaking something (like the glass of the s