Raspberry Pi Geekworm UPS HAT V3 Case

Getting fed up with my SmartThings hub, I decided to setup a Raspberry Pi 3 B+ with Home Assistant to meet my home automation needs. Everything was great until we got a power flicker and my home hub reset. Thus began the search for a battery backup solution.

After researching the various battery backup options for the Raspberry Pi, I ultimately decided on going with the [Geekworm UPS HAT V3](https://geekworm.com/products/raspberry-pi-4-ups-hat-3) with a [3.7V 2800mAh 134049 Lipo Battery](https://www.amazon.com/gp/product/B07BTNWV1Y). Unfortunately, I couldn't locate any cases that were suitable for this application, so I decided to remix this awesome case.

Here are a few things to consider about the Geekworm USB HAT V3:
* The polarity of the battery connector was reversed from that of the battery, so be sure to pay careful attention during assembly and swap the wires in the battery connector as required.
* The most convenient mode of operation is to switch the AUTO UPS feature