Raspberry pi Hifi player

Compact raspberry pi Hifi player.
Uses a normal RCA output for an classing 2 channel amplifier.
Made with on off and reset switch and leds to indicate the status.
Main Needed parts:
For the basic model which is easy to make and requires little soldering.
• Raspberry pi
• Raspberry pi DAC
• Meanwell RS15 5V
• 2x RCA female connectors
• M3 screw and bolts
• 1,3” I2s OLED display
• Some wires
The raspberry pi screws into the case using the standoff delivered by most DAC cases I used the Hifiberry DAC. You may need to desolder the RCA connectors on the HAT because there is no space for those inside the case itself. 5V is feeded to the pi by the 5V PSU though the GPIO pins.

Oled software:
https://github.com/antiprism/mpd_oled
Optional: If you want the leds and physical on of switch like I do you’ll need the following parts too.
Will require some gluing and soldering and programming the Arduino.
• 12mm flat head switch
• Arduino pro Mini
• 3 leds in colours with resis