Raspberry Pi HQ Camera Ball and Socket Wall Mounted

A Raspberry Pi HQ Camera Module can be used in combination with a Raspberry Pi Zero W as a high quality webcam. You can check out how to create the camera [here](http://www.davidhunt.ie/raspberry-pi-zero-with-pi-camera-as-usb-webcam/).

This thing is a ball and socket mount for the camera so you can easily rotate it and a wall mount so you can easily move it. The HQ camera module is attached to the ball, and the raspberry pi is attached to the socket. This is mostly useful in static scenarios such as webcam, streaming or security camera systems.

To connect all the parts you will need
- 8 M2.5 nuts
- 8 M2.5 10mm (or larger) bolts.

To make a full setup you will need
- 8x *spacer*
- 1x *ball*
- 1x *socket*
- 1x *interface*
- 1x *wallmount*

Make sure to rotate the *interface* and the *wallmount* to a standing-up position for printing. Additionally, place the *interface* with the not-slotted face on the build plate or you will have to bridge the gap.

There are severa