Raspberry Pi Media Center V2

Update 01/09/2020

Added a top with vents so now you have the option.

Bottom:
.:HDD:.
- Brought in one side of the HDD stand and shrunk it down a very little so wires can run better from the led to the gpio board.
- Moved the stands closer to the right for more space on the left side of the case.

.:RPi:.
- Increased the pole size of the stands on the port side so the RPi snaps in and sits better.

================================================================


Version 2 of my Raspberry Pi Media Center case (https://www.thingiverse.com/thing:3374290). I have been learning to use Fusion 360 for some time now and I think I'm getting the hang of it. The pictures of the printed bottom half are from an older version before I made changes to the one uploaded.

Case is 140mm x 140mm so it'll fit on a lot of beds. Print time for the bottom half was almost 6hrs. for me on standard settings.

The LED in the front has a 5mm hole so you can program that you