Raspberry Pi mount for CR-10S Pro

This is a raspberry pi mount for the CR-10S Pro so that it can be connected to the usb slot for octoprint and other things.

Don't worry there is plenty of clearance for the x axis rail. In the picture provided the x rail is in the home position at coord 0.00. There is even room to plug in the power cable, but if you have an [angled power connector](https://www.amazon.com/StarTech-com-Micro-Cable-Black-USBAUB2MD/dp/B00EBGGXS2/ref=sr_1_6?keywords=right%2Bangle%2Bmicro%2Busb%2Bconnector&qid=1559731262&s=gateway&sr=8-6&th=1) it might look a bit neater.

Still a work in progress so things aren't perfect in terms of snapping together, but it should work with a tiny bit of force. This includes mounting the unit onto the printer. The screw this uses needs to be pushed through the camera slot and screw hole before the pi can be inserted. Alternatively you can mount the case first and then slide the pi in.

This works better as a right-hand mount but you can also mount it on the left side