Raspberry Pi mount for Ender 5 electronics enclosure

# ENDER 5 electronics mounting plate for Raspberry Pi

This mounting plate is designed to be placed inside the electronics case of an Creality Ender 5.
It should hook under the power switch on the left side of the case and has holes to be screwed onto the side of the Landy-PSU using M4 Screws.

It's main use is holding a Raspberry Pi with Octoprint.

It can hold a [LM2596 Board like this](https://www.aliexpress.com/item/32721507753.html). I extended it with multiple [terminal blocks](https://www.aliexpress.com/item/32942955260.html) and [2.54mm pins](https://www.aliexpress.com/item/32552698181.html) for easier cable management.
The LM2596 is set to output 5.1V with an input of 24V. This can power the Raspberry Pi by connecting to the 5V and GND pins on the Pi.

It can also hold a SRD-05VDC-SL-C Relay board to be used with [Octoprint PSU Control](https://plugins.octoprint.org/plugins/psucontrol/). You can deliver 5V to it directly from the LM2596 and control it with any BCM-P