Thingiverse
Raspberry Pi Mount for IKEA Skadis
di mintonette
258
Download
205
Likes
3
Makes
Open mount to hang a Raspberry Pi 3B+, Pi 4 or Pi 5 from an IKEA Skadis peg board using CSD_Salzburg’s [Skadis universal hook](https://www.thingiverse.com/thing:2853261).
3 versions available:
- *raspberry_pi_skadis_mount* - (Pi 3/4 only) No extra hardware needed, Pi clips into place.
- *raspberry_pi_skadis_mount_rpi5* - (Pi 5 compatible) Same as the original Pi 3/4 mount but one clip moved to accommodate the Pi 5. Should still work with the 3 or 4.
- *raspberry_pi_skadis_mount_for_m2.5* - No clips, Pi secured by 4 M2.5 screws.
The Pi can be mounted in any direction using 2 universal hooks.
Recommend printing everything above the 4.5mm base at 100% concentric infill (or increase the number of perimeters/walls) to achieve the best quality mounts and clips.
No supports needed.
3 versions available:
- *raspberry_pi_skadis_mount* - (Pi 3/4 only) No extra hardware needed, Pi clips into place.
- *raspberry_pi_skadis_mount_rpi5* - (Pi 5 compatible) Same as the original Pi 3/4 mount but one clip moved to accommodate the Pi 5. Should still work with the 3 or 4.
- *raspberry_pi_skadis_mount_for_m2.5* - No clips, Pi secured by 4 M2.5 screws.
The Pi can be mounted in any direction using 2 universal hooks.
Recommend printing everything above the 4.5mm base at 100% concentric infill (or increase the number of perimeters/walls) to achieve the best quality mounts and clips.
No supports needed.
mintonette pubblica anche su
33 modelli aggiuntivi su altre 2 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
