Thingiverse
Raspberry Pi NAS enclosure
by DerThes
215
Downloads
180
Likes
0
Makes
Enclosure for Raspberry Pi 4. This holds 4 2.5" HDDs to build a NAS.
In addition you will need:
* Pi 4
* [USB/SATA cables ](https://www.aliexpress.com/item/32804287463.html?spm=a2g0s.9042311.0.0.3c3f4c4dfNwsR5)
* [Powered USB HUB](https://www.amazon.com/Aiibe-Splitter-Adapter-Charger-Mulitple/dp/B07BBLL3MJ)
* [M3 standoffs](https://www.aliexpress.com/item/32595258608.html?spm=a2g0s.9042311.0.0.27424c4diEZVtZ)
I glued the individual parts together with 5 minute epoxy. Make sure to remove the burrs from the drive mounts to get a good friction fit. I used supports where needed.
In addition you will need:
* Pi 4
* [USB/SATA cables ](https://www.aliexpress.com/item/32804287463.html?spm=a2g0s.9042311.0.0.3c3f4c4dfNwsR5)
* [Powered USB HUB](https://www.amazon.com/Aiibe-Splitter-Adapter-Charger-Mulitple/dp/B07BBLL3MJ)
* [M3 standoffs](https://www.aliexpress.com/item/32595258608.html?spm=a2g0s.9042311.0.0.27424c4diEZVtZ)
I glued the individual parts together with 5 minute epoxy. Make sure to remove the burrs from the drive mounts to get a good friction fit. I used supports where needed.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
