Raspberry Pi Wireless Time-Lapse Camera (Easy Print)

An easy to print raspberry pi wireless camera holder with recessed LED holes for 5mm white LEDs. I would highly recommend "diffusing" the LEDs by sanding them with 400 grit sandpaper before installation. Fits perfectly on a COTS gooseneck holder.

Before the details, how about a timelapse of one of these cameras being printed:

https://twitter.com/brendonbuilds/status/955457300524920832

Now, on to the build!

Parts:
Raspberry Pi Wireless
Raspberry Pi Camera

Gooseneck with clamp: http://amzn.to/2EYHpgw

8 - 5mm white LEDs
8 - 100 ohm resistors
8 - #2 0.25" screws
4 - #2 0.5" screws
4 - #2 0.75" screws
1 - M4 12mm bolt/nut
400 grit sandpaper (optional, but recommended)

Installation:

Mount the official raspberry pi camera to the front with #2 0.25" screws then install the LEDs/wiring. I'd recommend using a 3d pen to secure the LEDs in place. Mount the raspberry pi wireless module to the back with #2 0.25" screws. After testing all the wiring/connections (import