Thingiverse
Raspberry Pi Zero case for OLED and rotary encoder
par DanielBack
46
Téléchargements
40
Likes
1
Makes
A small case made for the Raspberry Pi Zero with a rotary encoder and an 0.96" OLED-display. I designed it to build a [HueBerry](https://github.com/fiveseven808/HueBerry_SmartSwitch) to control my Philips Hue bulbs. The case only has a hole for the power-plug since I wanted it to be as minimalistic as possible.
It is designed in Fusion 360 and I included a STEP-file and a Fusion archive in case you want to modify it. Designed to be printed without supports.
To assemble it you need 4 M3 screws and preferably an M3 tap, but it might be possible to screw them in without tapping. The encoder can be screwed in if it is tapered, or you can glue it in. The screen unfortunately has to be glued in since I couldn't find a way to screw it in. I used hot glue and that worked fine.
It is designed in Fusion 360 and I included a STEP-file and a Fusion archive in case you want to modify it. Designed to be printed without supports.
To assemble it you need 4 M3 screws and preferably an M3 tap, but it might be possible to screw them in without tapping. The encoder can be screwed in if it is tapered, or you can glue it in. The screen unfortunately has to be glued in since I couldn't find a way to screw it in. I used hot glue and that worked fine.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
