Thingiverse
Raspberry Pi Zero W Camera Pi v1
par Jonchu
28
Téléchargements
12
Likes
0
Makes
This is a case to hold the Raspberry Pi Zero W (guess for standard zero too).
It fits the Board perfectly, the camara has a bit of room to giggle but is fully functional.
Notice the USB OTG port has no cutout, this is on purpose. If you need this cutout too, message me and I'll update this file.
I recommend inserting the Camera Module upside down (opposite as in the picture) so the cable doesn't suffer as much. Also, by doing this the hole for the camera will let it see.
The hole for the camera is a bit too much down, i'll fix in the future.
It fits the Board perfectly, the camara has a bit of room to giggle but is fully functional.
Notice the USB OTG port has no cutout, this is on purpose. If you need this cutout too, message me and I'll update this file.
I recommend inserting the Camera Module upside down (opposite as in the picture) so the cable doesn't suffer as much. Also, by doing this the hole for the camera will let it see.
The hole for the camera is a bit too much down, i'll fix in the future.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
