Thingiverse
Raspberry Pico Macro Pad
von sepro
1.2k
Downloads
950
Likes
8
Makes
If you are looking to build a macropad with 9 mechanical switches and a raspberry pi pico inside this is the case you need. The design is a remix of VOID9 Macropad (based on the pro micro) and the [Pico Armour](https://core-electronics.com.au/tutorials/3d-printable-case-for-raspberry-pi-pico.html) case.
I've printed it myself and it fits perfectly, details for this build, instructions on how to set up the Pi Pico and the code itself are available from my blog: [http://blog.4dcu.be/diy/2021/04/05/Macropad.html](http://blog.4dcu.be/diy/2021/04/05/Macropad.html)
More recently I've also programmed it as a MIDI device, if that is something you want to play with check out [this post](http://blog.4dcu.be/diy/2021/05/20/MIDIpad.html)
Other items required:
* 9x Mechanical switch (tested with Gateron and Kailh)
* 9x 1.8 mm Led (optional)
* 9x 82 Ohm Resistor (optional)
* a set of suited keycaps (e.g. numerical keys)
* 1x Raspberry Pi Pico, with CircuitPython
*
I've printed it myself and it fits perfectly, details for this build, instructions on how to set up the Pi Pico and the code itself are available from my blog: [http://blog.4dcu.be/diy/2021/04/05/Macropad.html](http://blog.4dcu.be/diy/2021/04/05/Macropad.html)
More recently I've also programmed it as a MIDI device, if that is something you want to play with check out [this post](http://blog.4dcu.be/diy/2021/05/20/MIDIpad.html)
Other items required:
* 9x Mechanical switch (tested with Gateron and Kailh)
* 9x 1.8 mm Led (optional)
* 9x 82 Ohm Resistor (optional)
* a set of suited keycaps (e.g. numerical keys)
* 1x Raspberry Pi Pico, with CircuitPython
*
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
