Thingiverse
raspberry zero + raspicam microscope adapter
von n800sau
0
Downloads
2
Likes
0
Makes
Objective has to be removed from raspicam.
Microscope is XSZ-107T
Image is not perfect. It gets only the center of the hole image. Still better than nothing.
Also needed:
7 inserts m3 D~ 4.6 L ~ 5.0 ( or 4 m3 nuts)
5 m3 bolts ~ 12mm
2 m3 bolts ~ 20mm
Two springs.
Microscope is XSZ-107T
Image is not perfect. It gets only the center of the hole image. Still better than nothing.
Also needed:
7 inserts m3 D~ 4.6 L ~ 5.0 ( or 4 m3 nuts)
5 m3 bolts ~ 12mm
2 m3 bolts ~ 20mm
Two springs.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!