Thingiverse

RaspberryPi 3 case, no screws

von jegi

3.5k Downloads

2.1k Likes

58 Makes

Zum Modell

**Raspberry Pi 3 case, requires no screws. The two parts snap together.**

Models:
* RaspberryPi 3B+: Works perfectly.
* RaspberryPi 3B: Works perfectly.
* RaspberryPi 3: Works perfectly.
* RaspberryPi 2: Should fit. Feedback?
* RaspberryPi B+: Community reported that it works.

Snap-in mechanism:
The case can be closed and reopened repeatedly. The snap-in mechanism goes around three sides of the case, is robust and provides a good fit.

Update 2021-12-12: Now with access to camera module and GPIO ports.

Remix from 0110-M-P

Printer models:
Printed on 20+ different 3D printer models by the community (see below)

Thanks for all the comments!

-----------

**Printed myself:**
* Ultimaker 2+: Nozzle 0.4mm (not 0.6!) / Cura 2.1.2 / Normal Quality / Infill Light / 2.85mm PLA filament

**Printed successfully by the community on those printers:**
* Anet A8: Rafts No / Supports No / Infill 30%
* Anet E12 printed on glass: 0.1 layer / Hatchbox Black PLA / 205C No

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat