RasPi Zero 3.5 LCD Stand

Design Tools:
DS-Mech

Printer:
Makerbot Rep5th

Rafts:
Yes

Supports:
No

Resolution:
Z:0.15mm; Nozzle: 0.4mm

Infill:
50% Rectilinear

I set the screen resolution of Raspi Zero W to 720x480 and use it now.
The LCD down converts to 480x320 of the native resolution.
The touch panel can be used by installing an appropriate driver provided by the manufacturer.

I used a 7cm short cable of mini HDMI type-C(plug) = HDMI type-A(socket) for HDMI connection.
Remove the socket cover for the type-A side connector for thinning.

RasPi 3.5 LCD Stand is here:
https://www.thingiverse.com/thing:2546459

If you do not need wall mount, LCD_Stand_B - 01 parts can be used.
The height of the LCD support is reduced a little.