Rat Rod HueForge with frame

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5 #002a96 PLA BambuLab Basic Cobalt Blue Transmission Distance: 1.2 #7f0320 PLA BambuLab Basic Maroon Red Transmission Distance: 1.6 #ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5 #f56233 PLA BambuLab Basic Orange Transmission Distance: 5.3 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 8 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue Gray At layer #9 (0.8mm) swap to Cyan At layer #10 (0.88mm) swap to Cobalt Blue At layer #12 (1.04mm) swap to Maroon Red At