Rat Rod Rail OpenSCAD

This is my Rat Rod Rail dragster slotcar. The body can be found here... https://www.thingiverse.com/thing:3671264/files ,or it can be found in my likes. You will have to scale it down in the slicer at .4 to fit this chassis. I used double sided tape to hold the body on, so that it can be moved to make room for tires. I used short spacers on the rear axle. I glued the brace just in front of where the swingarm is mounted with 2 6-32 screws. You might have to clean out the holes on the chassis so that the swingarm swings freely. You can use a short rubber band from the hole in the swingarm to the brace to help your rail do a wheelie when it leaves the line. It takes all of the usual slotcar parts, with the largest tires you can find on the rear, and the smallest ones you can find on the front.