Thingiverse
RATGDO Enclosure
by BobP_
8
Downloads
8
Likes
1
Makes
This “thing” is an enclosure for the “RATGDO” module develop by Paul Wieland. Details about the RATGDO module an be found at https://paulwieland.github.io/ratgdo/. There have been several revisions to the module provided by Paul and I cannot say with certainty that this enclosure and its mounting points will match all revisions. The module I ordered and received in November 2023 is model 2.5i. The two mounting holes in the PCB are spaced 38mm apart. The PCB max dimensions were 46mm X 41mm. Please refer to the photos and drawings to make sure it will work with your particular revision.
The project was printed using PLA+ with a layer height of 0.3mm, using an infill of 15%. Four flanges at the base are provided for mounting using cable ties or screws.
The cover and PCB are secured to the base using M2x8, truss-head, self tapping, screws. If M3 screws are to be used, simply enlarge the mounting holes in the base.
The project was printed using PLA+ with a layer height of 0.3mm, using an infill of 15%. Four flanges at the base are provided for mounting using cable ties or screws.
The cover and PCB are secured to the base using M2x8, truss-head, self tapping, screws. If M3 screws are to be used, simply enlarge the mounting holes in the base.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
