MakerWorld
Electronics
Voir le modèle
Razer Core X Chroma Vented Front Panel
12
Téléchargements
5
Likes
6
Makes
Replacement vented front panel for the Razer Core X and Core X Chroma. Always struck me as a little odd that the original panel was solid rather than having holes for airflow, so decided to make my own. Printed at 0.12 to minimise stair stepping on the rounded bits but perfectly usable at 0.2 Dimensions are taken from the original part so there's a gap at the bottom for the lights on the chroma edition, and a couple of mm panel gap at the sides. Eventually I may look to add a fan mount to the back of this as there's plenty of space for an 80mm, or even a 120mm depending on the size of GPU in the enclosure. At the moment I've fixed mine in with VHB tape but you could go about adding heat set inserts and reuse the original screws if you prefer.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !