Thingiverse
Razor Motor Mount
von Forrest3D
0
Downloads
1
Likes
0
Makes
Slapped an MY1020 on a cheap mini chopper frame I got. Hopefully this helps someone else. It uses the stock motor mount hole locations.
The MY1020 mount holes can be a little off from motor to motor but should be good enough to fit most. Let me know if you need a slightly different version.
The stock chain still worked for me in my case.
The idea is hex head bolts are captive by the mount plate and you can use nuts/washers on top side to hold down the motor. Slide the bolts in before mounting the plate to the frame.
The MY1020 mount holes can be a little off from motor to motor but should be good enough to fit most. Let me know if you need a slightly different version.
The stock chain still worked for me in my case.
The idea is hex head bolts are captive by the mount plate and you can use nuts/washers on top side to hold down the motor. Slide the bolts in before mounting the plate to the frame.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
