Thingiverse
RC Carbon Cub
162
Downloads
145
Likes
0
Makes
To design a 3d printable rc plane was a challenge I had put to myself. What better choice than my personal favorite bush plane?
Wingspan 1m, neutral point is around 55mm from LE.
I'm using a Sunnysky x2216 1200kv motor (mounting holes 16x19), 8x6 prop, 1300 3S, and 25A ESC
There are two options for the wing. Either an 8mm spar 800mm long can be used, or one thats 120mm along with filament strings connected to the fuse with lugs.
RTF weight with battery as tested is 685gm.
Would suggest printing all parts aft of the wing at 90% flow
Will upload flight video soon
STEP on grabcad/library/rc-carbon-cub-1
Wingspan 1m, neutral point is around 55mm from LE.
I'm using a Sunnysky x2216 1200kv motor (mounting holes 16x19), 8x6 prop, 1300 3S, and 25A ESC
There are two options for the wing. Either an 8mm spar 800mm long can be used, or one thats 120mm along with filament strings connected to the fuse with lugs.
RTF weight with battery as tested is 685gm.
Would suggest printing all parts aft of the wing at 90% flow
Will upload flight video soon
STEP on grabcad/library/rc-carbon-cub-1
tanmaychhatbar also publishes on
22 additional models across 1 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
