Thingiverse
RC controller (esp32, nrf24l01)
por Olaf686
110
Descargas
125
Likes
0
Makes
RC controller for control of any RC vehicle.
Components:
- 4 standard 6mm potentiometers (linear 10k ohm)
- 2 KY-023 joystick modules
- SSD1306 128x64 1.3" I2C OLED display
- ESP32 (DOIT DEVKIT V1)
- nRF24l01 PA+LNA 2.4GHz module
- 4 DPDT switches
- 2000mAh 5V USB powerbank
The bottom and top are locked at the corners by glued neodymium magnets (10x1mm, 8 total). The display sunscreen is glued onto the top. All PCB components are also glued onto the standoffs.
Feel free to modify the top piece to fit different hardware or input.
No support needed, most tricky parts are the hexagon roofs at 60 degree overhang.
Components:
- 4 standard 6mm potentiometers (linear 10k ohm)
- 2 KY-023 joystick modules
- SSD1306 128x64 1.3" I2C OLED display
- ESP32 (DOIT DEVKIT V1)
- nRF24l01 PA+LNA 2.4GHz module
- 4 DPDT switches
- 2000mAh 5V USB powerbank
The bottom and top are locked at the corners by glued neodymium magnets (10x1mm, 8 total). The display sunscreen is glued onto the top. All PCB components are also glued onto the standoffs.
Feel free to modify the top piece to fit different hardware or input.
No support needed, most tricky parts are the hexagon roofs at 60 degree overhang.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
