RC Glider Cart

Detachable cart that allows safer hands-free launching of RC motorgliders. Simply put the model on the cart and accelerate up to speed. The cart will drop away as you climb out. Bonus points if you can land on it. :) Should accommodate most gliders up to a 2M wingspan, possibly more if your fuselage isn't wider than 127mm or 5". The bottom of the wing to the ground is about 184mm or 7.25" which should allow for planes with up to a 12" prop, but every plane is different, so you'll have to check for clearance on your plane. The only non-printable item you'll need to supply is a 6mm rod or tube of some kind for the axles. I used a 6mm carbon rod, but aluminum would be good too. Both are available on Amazon. Printing TipsSince this will likely spend a lot of time in the sun, I recommend printing the body and wheels out of a more heat-resistant material like PETG, ABS, or ASA. PLA would work in a pinch, but it can get soft in the sun.There are two sheets of optional