Thingiverse
Hobby
Voir le modèle
RC MiniWinch
387
Téléchargements
272
Likes
2
Makes
** 2018-10-27 Update ** I got some advice on a french forum. You case use kite string as wire for cool rendering and strength.
** 2018-10-04 Update ** I added small discs to encase the wire/cable that won't go into the winch case.
Hello.
Here's a mini RC winch for a N20 motor.
You'll need two parts from other designers:
The hook: https://www.thingiverse.com/thing:14653
And the gears generated and adapted from janssen86 OpenSCAD library:
https://www.thingiverse.com/thing:3134342
It will fit 1/8 until 1/12 models and can be scewed two ways (bottom or back).
The metal parts are:
4 x 50mm m3 screws for the main body
2 x 8mm m3 screws for the front guide
The rope axle is made from a 4mm brass tube which is forced into the 16mm gear.
I made a hole through it by pinching a little with a cutting plier and a 1.5mm drill.
** 2018-10-04 Update ** I added small discs to encase the wire/cable that won't go into the winch case.
Hello.
Here's a mini RC winch for a N20 motor.
You'll need two parts from other designers:
The hook: https://www.thingiverse.com/thing:14653
And the gears generated and adapted from janssen86 OpenSCAD library:
https://www.thingiverse.com/thing:3134342
It will fit 1/8 until 1/12 models and can be scewed two ways (bottom or back).
The metal parts are:
4 x 50mm m3 screws for the main body
2 x 8mm m3 screws for the front guide
The rope axle is made from a 4mm brass tube which is forced into the 16mm gear.
I made a hole through it by pinching a little with a cutting plier and a 1.5mm drill.
ka3ros publie également sur
13 modèles supplémentaires sur 3 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
