RC Torro Sturmtiger Speaker Box

This is a speaker box i designed to fit inside my 1/16th Torro Sturmtiger Tank to replace the supplied one.
It is in two halves and requires gluing together (Iused automotive bumper repair epoxy glue)
The box is designed to fit a Visaton FRS 8 Ohm 3.3 Inch speaker.
It is L shape to allow a TARR Smoke Unit to sit next to it at the rear of the tank I do not know if the original Heng Long style smoke generator will fit in the gap as I have binned it for the TARR unit.
It sits just behind the on off switch bracket and it requires 3 small holes to be drilled into the hull sides above the tracks to allow it to be fixed in position.
The top hull section requires the Daughter circuit board to be moved and the mounting screw lugs to be trimmed flush with the hull to avoid them fouling the speaker this is due to making the gap underneath it to allow for the 7.2 v stick pack battery to remain in its original position .

The Speaker is available here - https://www.ebay.co.uk/itm/Visaton-FRS