Thingiverse
Realistic base
par PM1984
11
Téléchargements
10
Likes
0
Makes
Realistic base I designed in FreeCad for the 1:200 version.
Has a back space for an arduino nano and cables, a lateral hole for a button (12mmx12mmx3mm, came in the Arduino starting kit), a top hole for a LED (where a cottage will be placed). All holes (button, LED and wind turbine) end up in the arduino nano space.
Cables were soldered to the board. Programmed a simultaneous blinking with different patterns for both LEDs. Motor was soldered to the 3.3v pin and ground. Both LEDs have a resistance (330 Ohms) in series. Button is pull-down (if I remember correctly, so 10 kOhm resistance is connected to ground).
Back cover needs 2.5mmx10mm screws.
Added the following elements to the base:
1. Cottage over the base LED: https://www.thingiverse.com/thing:981780/files
2. Trees: https://www.thingiverse.com/thing:2746947
https://www.thingiverse.com/thing:2807576
https://www.thingiverse.com/thing:3094902
Has a back space for an arduino nano and cables, a lateral hole for a button (12mmx12mmx3mm, came in the Arduino starting kit), a top hole for a LED (where a cottage will be placed). All holes (button, LED and wind turbine) end up in the arduino nano space.
Cables were soldered to the board. Programmed a simultaneous blinking with different patterns for both LEDs. Motor was soldered to the 3.3v pin and ground. Both LEDs have a resistance (330 Ohms) in series. Button is pull-down (if I remember correctly, so 10 kOhm resistance is connected to ground).
Back cover needs 2.5mmx10mm screws.
Added the following elements to the base:
1. Cottage over the base LED: https://www.thingiverse.com/thing:981780/files
2. Trees: https://www.thingiverse.com/thing:2746947
https://www.thingiverse.com/thing:2807576
https://www.thingiverse.com/thing:3094902
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
