Thingiverse
ReARM mounting bracket for RepRapGuru
by bdsnk
0
Downloads
1
Likes
0
Makes
I was in need for a mounting bracket for a Re-ARM board, and came across Speedy_67's design. Since I didn't want to drill new holes to my printer's acrilic frame, I decided to use the existing ones. So I edited the original design in FreeCAD.
My redesign added two mounting points with m3 nuts. The insert size isn't a perfect fit, so the m3 nuts can be clamped using a vise. It worked for me, and can be seen in the photos of this thing.
The dimension used was the one between the Arduino Mega holes, on the power connector side (82,55mm). In theory this mounting bracket can be used on frames made for the Arduino Mega.
BOM:
2 x m3 nuts
4 x m3 * 6mm screws
Change Log:
31/03/2022 - Files uploaded.
My redesign added two mounting points with m3 nuts. The insert size isn't a perfect fit, so the m3 nuts can be clamped using a vise. It worked for me, and can be seen in the photos of this thing.
The dimension used was the one between the Arduino Mega holes, on the power connector side (82,55mm). In theory this mounting bracket can be used on frames made for the Arduino Mega.
BOM:
2 x m3 nuts
4 x m3 * 6mm screws
Change Log:
31/03/2022 - Files uploaded.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
