Red & Bronze Fall Leaf Earring

My wife began asking that I design earrings for her and her friends. so I have created about 50 designs that I will slowly upload - so be on the lookout for new designs! Most can be printed with a .4 nozzle but for extra detail you may want to consider a .2 nozzle. I have printed these successfully on my P1S and A1 Mini. You will need earring hardware - i use the following kit from Amazon -- https://www.amazon.com/gp/product/B09YV65J75/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 50.43x45mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PLA BambuLab Matte Charcoal Transmission Distance: 0.6PLA BambuLab Matte Scarlet Red Transmission Distance: 2PLA Bambu lab Bronze Transmission Distance: 0.4PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filaments Swap Instructions:St