Slicer Discord
3DSEARCH / Hueforge & Lithophane / Red-Eyed Dragon
Red-Eyed Dragon – 3D printable model from MakerWorld MakerWorld
Hueforge & Lithophane

Red-Eyed Dragon

by Corp · Hueforge & Lithophane
16 Downloads
13 Likes
2 Makes
Go to Model
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size. You can adjust the X and Y but Z must remain the same.You may print at higher layer heights below the Min Depth of 0.48mmActual Depth is 2.2mm Filaments Used:BambuLab Basic Black Transmission Distance: 0.3BambuLab Basic Blue Gray Transmission Distance: 2.5BambuLab Basic Gray Transmission Distance: 3BambuLab Basic White Transmission Distance: 6This print uses 4 unique filaments. Substitute to your own needs. Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to GrayAt layer #11 (0.96mm) swap to GrayAt layer #20 (1.68mm) swap to White for the rest. Boost MeGot a Boost to spare? Every little bit helps the motivation. Thank you!MembershipWant to go commercial or maybe just show some love? Consider signing up to show support!
Category
Hueforge & Lithophane
Source
MakerWorld
Published
Updated
What you need to print this: Advanced Medium confidence
Why?
supports needed · large print
Single piece Supports required
Supports 2/3
Assembly 0/3
Settings 1/3
Bed size 2/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
Min. bed size
200 mm (Large)
Post-processing
Painting
Software
Cura, PrusaSlicer, or similar
Same designer, more platforms

Corp also publishes on

338 additional models across 1 more platforms

MakerOnline
338 models
♥ 12,227 ↓ 46,410
Verified by matching model titles across platforms.
Frequently Asked Questions
Which 3D printer is suitable for Red-Eyed Dragon?
Any FDM printer should handle Red-Eyed Dragon just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.
Does Red-Eyed Dragon need supports when printing?
Yes, Red-Eyed Dragon will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.
What file format is Red-Eyed Dragon available in?
Red-Eyed Dragon is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.
Is Red-Eyed Dragon free to download?
Yes, Red-Eyed Dragon is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Mythic Dragon Bookmark
Mythic Dragon Bookmark
by JAKI.I
↓ 6
Legend
Legend
by Corp
↓ 2 ♥ 3
Dragon Slayers Comical (No Name Bases)
Dragon Slayers Comical (No Name Bases)
by ClydeB3
♥ 5
Rayquaza Wall Art
Rayquaza Wall Art
by Sitsero
↓ 39 ♥ 14
Zekrom Lightbox
Zekrom Lightbox
by Sitsero
↓ 11 ♥ 9
Zekrom Wall Art
Zekrom Wall Art
by Sitsero
↓ 22 ♥ 10
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection