Red redemption hueforge

by Mysstra3Dart

14 Downloads

32 Likes

12 Makes

Download Model

red redemption cowboy hueforge filament paint

Project: vaquero.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 120.47x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA smartfil negro Transmission Distance: 0.4 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Orange Transmission Distance: 5 PLA smatfil White Transmission Distance: 6This print uses 4 unique filamentsSwap In