Red Tesla Model Y (HueForge)

Red Tesla Model Y. Works great as a deco, wall art, sticker, or fridge magnet. Requires black, red, and white filaments.Printing Instructions:Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PLA BambuLab Matte Charcoal Transmission Distance: 0.6PLA BambuLab Basic Red Transmission Distance: 4PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 3 unique filaments Swap Instructions:Start with CharcoalAt layer #16 (1.36mm) swap to RedAt layer #21 (1.76mm) swap to Ivory White for the rest.