Redbull Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.12mmYou may print at higher layer heights below the Min Depth of 0.52mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Orange Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #9 (0.76mm) swap to Gray At layer #13 (1.08mm) swap to Jade White At layer #20 (1.64mm) swap to Orange for the rest.