Redcat Gen7 Electronics Tray-selfdrill

This is a custom electronics tray that moves the receiver and ESC lower and behind the motor/transmission. This will help lower your center of gravity, and if you're using a flat belly skid plate your motor likely hits the original metal bracket. This has no holes for mounting your electronics so you will have to drill with a 7/64" or 2.5mm drill bit and use 3mm allen screws. This lets you customize it to fit any RX/ESC combo. Also provided holes in the front of it for zip ties to hold any wires cleanly out of the way.

Mounts using 2x 3mmx10 screws and nuts using factory frame holes just in front/below the rear shock mounting locations.