Reef-Pi Server and Pump Enclosure

This is an enclosure for my [Reef-Pi Build](https://reef-pi.github.io/).

It is broken into four pieces to fit onto my MP Select Mini Printer so it needs to have the 2 top pieces and 2 bottom pieces slotted and then glued together.

There are two options:

* Use the first four files make a box that includes feet for only the Raspberry Pi and holes for two 12v peristaltic pump motors.

* Use the last four files make a box that includes feet for
* a Raspberry Pi, a L298N (pump controller)
* a PCA9685 board (lighting controller + pumps)
* a 20mm x 80mm circuit board (input power circuits for lighting and pumps)
* the space for to 12v pump motors.
* additional vent holes to help with cooling.

* One more option for replacing the pumps with 8 5.2mm plug connectors instead

I used the build guide for the lighting from [the Reef-Pi Build Guide](https://reef-pi.github.io/build-guides/lighting/) and the fritzing diagram from [this Hackster 4 Wheel Driv