Reference example use of replacement gameboy advance hinge

I'm posting this up just as a reference for anyone who wants to use a gamboy advance sp hinge in their design. The remarkable Penkesu cyberdeck used this hinge and I've wanted to try it since I saw that.

It's a very small part and you'll no doubt need to tweak the dimensions of your model to work well with your particular printer. Hopefully the sketches/photos attached here help.
* The hinge is designed to slide into one end of the two printed parts.
* I used a 6.3mm barrel for a snug fit.
* There are two shoulders inside the barrel that keep the hinge from rotating inside of it. The shape of the shoulders are a little different on each of the printed parts.
* on the first half of the printed part, the shoulders need to be 4.5mm tall and the hinge will slide through them until poking out the other side and butting up against the shoulder.
* on the receiving part, the hinge pushes in past the shoulders and there is a ring 3mm deep, and 1mm thick, that the hinge snaps i