Thingiverse

Refoss EM16 Antenna Bracket

by matttheamateur

0 Downloads

1 Likes

0 Makes

I have a Refoss EM16 energy monitor. My breaker panel is set inside the wall, so I can't stick the antenna into a knockout hole on the side of the panel. I designed this bracket so I can mount the antenna to the wall next to the panel.

The hole in the top is 3/4" (19mm) which is a nice snug fit for the rubber grommet on the antenna. I also added clips to the bottom to hold the wire close to the wall.

There are 3 versions. There is one for machine screws, one for countersunk screws, and one with no holes for double sided tape.

antenna Antenna holder antenna mount bracket EM16 energy monitor Energy Monitoring home assistant IoT Mains Energy Monitor mounting bracket open energy monitor Refoss

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format