Reinforcement bars for 3D printable rack

A set of reinforcement bars for my 3D printable rack system. You can use those bars to make the 3D printable rack more robust. This can be especially useful if you are wall mounting your rack. This model is part of a series of accessories for my 3D printable rack system. You can check the other models here:6-inch rack accessories.10-inch rack accessories.I've made those bars in two versions. I call them “single bar” and “triple bar”. The specs are as follows:Single barWidth: 15.875 mm.Height: 15.875 mm.Length: Versions made for racks with 150, 200 and 250 mm of depth.One hole for a M5 screw on each end of the bar.Can be used in any hole from the rails.Triple barWidth: 15.875 mm.Height: 47.625 mm.Length: Versions made for racks with 150, 200 and 250 mm of depth.Two holes for M5 screws on each end of the bar.It aligns with 1U from the rack.Boost MeI make these models for free, and it takes time and material to test them out. Your boost will help me keep releasing new models! Thank yo