Slicer Discord
relOJos  (cross-eyed clock) – 3D printable model from MakerWorld MakerWorld
Decor

relOJos (cross-eyed clock)

34 Downloads
33 Likes
12 Makes
Go to Model
Tired of the usual designs...here's a…Cross-eyed Watch! This original clock will tell you the time through its gaze!The left eye will indicate the hours of the day (and night), while the right eye will indicate the minutes.The design is intentionally kept "clean" but it will certainly be an impactful clock! Example: "relOJos" in action... 1 Hour Timelapse: - . - . - . - . - . - . - . - . - . - Its installation is very simple: 1) Place the rubber washer.2) Insert the mechanism from the inside.3) Insert the metal washer.4) Tighten with the appropriate nut.(replicate for both dials). 5) Pair the black sphere above the white sphere, keeping the white dot on the outside.6) Flatten the pins using a lighter and a flat screwdriver. (Children, have your parents do it). 7) Insert the dial with th
Category
Decor
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Single piece Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
PLA
Est. print time
1 h
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection